55 | CHAPTER 4 – REMOTELY MANAGING YOUR INTERACTIVE WHITEBOARD
SYSTEM
Simple Network Management Protocol (SNMP)
SMART UF65 and SMART UF65w projectors support a list of SNMP commands as
described in the management information base (MIB) file.
The SNMP agent supports SNMP version 1. Upload the MIB file to your SNMP
management system application, and then use it as described in your application’s
user guide.
Web Page Management
In addition to SNMP and RS-232 controls, you can access advanced setup features
via the projector’s web page. This web page enables you to access and manage the
projector from a remote location using any computer connected to your intranet.
NOTE
To access the web page, your browser must support JavaScript™. Most
commonly used browsers, such as Internet Explorer® or Firefox®, support
JavaScript.

Accessing Web Page Management

Before accessing the web page, you must attach the network cable to your projector
(see the SMART UF65 or SMART UF65w Projector Connection Diagram on page 12).
When you first connect your projector to a network, an IP address appears on the
on-screen display.
NOTE
You can also view the IP address by accessing the projector’s Network Settings
menu page, as described on page60.
To use the management
web page
1. Start your Internet browser.
2. Enter the IP address into the address line field, and then press ENTER.
The SMART UF65 Projector Settings (or SMART UF65w Projector Settings)
window appears.
3. Select the menu options in the left pane to access the settings on each page.
4. Select settings or type them with your computer’s keyboard, and then press the
Submit or action button next to each setting you change.