ABOUT THE TIGERSWITCH 100

9/125 micron single-mode fiber cable. The 1000BASE-LX Gigabit module operates at 1 Gbps, with support for auto-negotiation of duplex mode and flow control.

Optional 1000BASE-T Module (SMC6900GT)

SMC6900GT

Figure 1-10. Single-Port 1000BASE-T Gigabit Module

SMC6900GT contains one 1000BASE-T RJ-45 port that can support a link of up to 100 m (328 ft) using Category 5 or 5e twisted-pair cable. The 1000BASE-T Gigabit module operates at 1 Gbps, 100 Mbps, and 10 Mbps with support for auto-negotiation of speed, duplex mode and flow control.

Optional Stack Module (SMC6900S)

Figure 1-11. Stack Module

The uplink and downlink stack ports operate at 4.8 Gbps. These modules can be used to connect up to four switches to the backplane. A stack cable is included with each module.

Optional Redundant Power Unit (SMCRPU150W)

SMC provides an optional Redundant Power Unit (RPU), SMCRPU150W, that can supply power to the switch in the event of failure of the internal power supply.

1-9

Page 23
Image 23
SMC Networks manual Optional Redundant Power Unit SMCRPU150W, Optional 1000BASE-T Module SMC6900GT