SMC Networks 100 manual Compliances, FCC Class a, EC Conformance Declaration Class a

COMPLIANCES

FCC - Class A

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

You may use 50/125 or 62.5/125 micron multimode fiber optic cable for VF-45, SC, or ST-type connections.

Warnings 1. Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment.

2.When connecting this hub to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards.

EC Conformance Declaration - Class A

SMC contact for these products in Europe is: SMC Networks Europe,

Edificio Conata II,

Calle Fructuós Gelabert 6-8, 2o, 4a, 08970 - Sant Joan Despí, Barcelona, Spain.

This information technology equipment complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE Mark accordingly. It conforms to the following specifications:

EMC: EN55024 (1998)/CISPR-22 (1995)	Class A
IEC 61000-4-2 (1995)	4 kV CD, 8 kV AD
IEC 61000-4-3 (1995)	3 V/m
IEC 61000-4-4 (1995)	1.0 kV - (power line), 0.5 kV - (signal line)
IEC 61000-4-5 (1995)	2 kV - (line to line), 1 kV - (line to ground)
IEC 61000-4-6 (1995)	3 Vrms
IEC 61000-4-11 (1995)	Voltage dip: >95% - 10 ms
	30% - 500 ms
	60% - 100 ms
	Voltage interruption: >95% - 5000 ms

i