Part Names

 

Dimensions ( unit : mm )

 

Output Block

 

Output Block

Power Block

 

 

Tie-rod (2 pcs.)

 

 

Accessory

No.

Part names

Application

1

Output equipment connector

Connects with output device. Note1)

2

Operation display LED

Indicates the output status. Note2)

Note1 : For wiring method, refer to subsection "Wiring" (page 26) of section "EX9 Series Output Block/Power Block" in this manual.

Note2 : For display, refer to subsection "Display" (page 30) of section "EX9 Series Output Block/Power Block" in this manual.

Power Block

 

 

Tie-rod (2 pcs.)

Waterproof cap

 

 

Accessory

(for socket)(1 pc.)

No.

Part names

 

Application

1

Power supply connector

Power can be supplied to SI Unit when connecting

SI Unit next to Power Block. Note1)

 

 

2

Power input connector

Supplies power for output devices. Note1)

3

Operation display LED

Indicates the power supply status. Note2)

Note1 : For wiring method, refer to subsection "Wiring" (page 28) of section "EX9 Series Output Block/Power Block" in this manual.

Note2 : For display, refer to subsection "Display" (page 30) of section "EX9 Series Output Block/Power Block" in this manual.

72.6

80.3

59.8

21

PWR

59.8

21

Mounting/Installation

Refer to subsection "Mounting/Installation" (page 7) in this manual.

Specifications

Output Block

Model No.

EX9-OET1

 

EX9-OEP1

Power supply

 

 

External power supply type

Internal power supply type

(Supplied from the Power Block,

type

 

 

EX9-PE1.)

 

 

 

Rated voltage

 

 

24VDC

Output method

 

PNP output (-COM.)

Rated load

Max. 62mA/point

 

Max. 0.5A/point NOTE)

current

 

 

 

 

* It is limited to the max. Power Block supply current 3.1A.

NOTE

When connecting an inductive load such as a solenoid valve or relay without built-in surge sup- pressor, the use of an external surge suppressor is recommended.

24

25

Page 14
Image 14
SMC Networks EX500-AP -S, EX250-SEN1, EX9-AC020EN-PSRJ, EX9-AC -1 Part Names Dimensions unit mm, Output Block Power Block