
Connect the System
Attach the Wireless Barricade g Router to the Internet
If Internet services are provided through an xDSL or cable modem, use unshielded or shielded
DSL/Cable
Modem
ISP
(Primary)
Figure 5. Making the WAN Connection
Note: When connecting to the WAN port, use
Connecting the Power Adapter
Plug the power adapter into the power socket on the Router, and the other end into a power outlet. Check the indicator marked “PWR” on the front panel to be sure it is on. If the power indicator does not light, refer to “Troubleshooting” on page 66.
11