Configuring Client TCP/IP
3.the Local Area Connection Properties box, verify the box next to Internet Protocol (TCP/IP) is checked. Then highlight the Internet Protocol (TCP/IP), and click the Properties button.
4.Select “Obtain an IP address automatically” to configure your computer for DHCP. Click the OK button to save this change and close the Properties window.
5.Click the OK button again to save these new changes.
6.Reboot your PC.
Configuring a Macintosh Computer
You may find that the instructions here do not exactly match your screen. This is because these steps and screenshots were created using Mac OS 8.5. Mac OS 7.x and above are all very similar, but may not be identical to Mac OS 8.5.
1.Pull down the Apple Menu. Click Control Panel and select TCP/IP.
2.In the TCP/IP dialog box, make sure that Ethernet is selected in the Connect Via: field.
3.Select Using DHCP Server in the Configure field.
4.Close the TCP/IP dialog box.
22
