Advanced Setup
Wireless
To configure the Router as a wireless access point for wireless clients (either stationary or roaming), all you need to do is define the radio channel, the Service Set identifier (SSID), and encryption options.
Channel and SSID
You must specify a common radio channel and SSID (Service Set ID) to be used by the Router and all of your wireless clients. Be sure you configure all of your clients to the same values.
ESSID: The Service Set ID. This should be set to the same value as other wireless devices in your network.
Note: The SSID is case sensitive and can consist of up to 32 alphanumeric characters.
Wireless Mode: Set the communication mode for
the Router. (Default: 11g only.)
43
