SMC Networks SMCWPS-G manual TCP/IP Wizard

Wizard

Wizard is a configuration program that can assist you in setting up the necessary parameters for your print server device to function. Setup a print server by using Wizard.

TCP/IP Wizard

1.Click Wizard button just like a picture ￿￿.and select TCP/IP Wizard.

2Select “Obtain an IP address from DHCP server”. If there is a DHCP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. This setting, by default, is disabled. If you would like to manually specify an IP address to the device, please skip to the following step.

3In the IP Address option, type an IP address for the print server. The IP address must meet the IP addressing requirements of the network segment.

21