SMC Networks SMCWPS-G manual Appendix, Diagnostic Mode Wireless

Appendix:

Diagnostic Mode (Wireless)

If you have no the twisted-pair cable to configure print server and have problems to configure it on wireless network. Please refer to the following steps:

1.Change the print server to diagnostic mode by switching the DIP switch to DIAG mode.

2.Change your wireless adapter to Ad-hoc mode, and the ESSID: WLAN-PS; Channel: 6

3.Run PSAdmin to discover the print server.

4.Select the wireless print server

5.Select wireless and input the ESSID, Channel, Rates that meet your network environment, then press ok.

76