Antenna#1” and “Use Antenna #2”. If the wireless frequency in the area is very crowded there will be lots of interference. Using the default “Diversity” option might not be the best option to achieve optimal performance. Please configure “Use Antenna #2” for TT™2400X and “Use Antenna #1” for TT™5800X to force the cards to use only those ports at all times for both RX and TX operations. This will under most cases give you extra output power and receive sensitivity.
Make sure also that U.FL cable adapter for the MiniPCI radio card is connected properly matching the antenna number you selected. Please use the following pictures to identify antenna port numbers:
Appendix G: Troubleshooting
All Rights Reserved. Copyright 2006 Teletronics International, Inc.
2 Choke Cherry Road, Rockville, MD 20850 Tel: 301.309.8500 Fax: 301.309.8851
