Hob burner layout, Greasing the gas taps | Smeg PTS723-3 instruction

5.9Hob burner layout

Instructions for the Installer

5.9Hob burner layout

Burner type

1 Semi rapid

2 Rapid

3 Ultra-Rapid

5.10Greasing the gas taps

Over time, the gas taps may become stiff or jam. Clean their insides and change their lubricating grease. This operation must be carried out by a skilled technician.

13

Image 11

Smeg PTS723-3 manual Hob burner layout, Greasing the gas taps, Instructions for the Installer, Burner type

Contents

8. Cleaning and maintenance Table of Contents1. Precautions for safety and use 2. Fitting the appliance in the top 7. Using the hob NEVER ATTEMPT TO REPAIR THE APPLIANCE YOURSELF Precautions for Safety and Use1. Precautions for safety and use NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD 2.1 Fixing to the supporting structure Instructions for the Installer2. Fitting the appliance in the top Fit the insulating gasket provided carefully around the outside edge of the hole made in the top as shown below, pressing it down with your hands so that its entire surface fits snugly. Follow the dimensions shown, depending on the model of hob to be installed, bearing in mind that on both models the long front edge must be flush with the hole. Fix the hob to the structure using the brackets A provided. Carefully trim off the excess edge of the gasket B. The dimensions in the drawing below refer to the hole on the inside edge of the gasket 3. Electrical connection 4. Gas connection 4.3 Combustion gas discharge 4.1 Bottled gas connection4.2 Room ventilation 5.1 Removing the hob skin 5. Adapting to different types of gas Nominal BurnerheatBottled gas - G30/G31 30/37 mbar capacity kW 5.2 Adjusting for bottled gas5.3 Adjusting for town gas 5.4 Adjusting for natural gas 5.6 Reassembling the hob skin 5.5 Adjusting the primary air flow5.7 Adjusting the minimum setting for natural gas and town gas 5.8 Adjusting the minimum for bottled gas Burner type 5.9 Hob burner layout5.10 Greasing the gas taps 6.1 The front panel Instructions for the User6. Description of controls 7.2 Positioning the griddle plate 7. Using the hob7.1 Lighting burners with safety device 7.3 Practical hints for using the burners 8.2 Cleaning the components 8. Cleaning and maintenance8.1 Cleaning stainless steel Page 914773119/ B