Precautions for Safety and Use | Smeg PTS723-3 specification

Image 2

Smeg PTS723-3 manual Precautions for Safety and Use, Precautions for safety and use, This Nameplate Must Never Be Removed

Contents

7. Using the hob Table of Contents1. Precautions for safety and use 2. Fitting the appliance in the top 8. Cleaning and maintenance NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD Precautions for Safety and Use1. Precautions for safety and use NEVER ATTEMPT TO REPAIR THE APPLIANCE YOURSELF 2.1 Fixing to the supporting structure Instructions for the Installer2. Fitting the appliance in the top Fit the insulating gasket provided carefully around the outside edge of the hole made in the top as shown below, pressing it down with your hands so that its entire surface fits snugly. Follow the dimensions shown, depending on the model of hob to be installed, bearing in mind that on both models the long front edge must be flush with the hole. Fix the hob to the structure using the brackets A provided. Carefully trim off the excess edge of the gasket B. The dimensions in the drawing below refer to the hole on the inside edge of the gasket 3. Electrical connection 4. Gas connection 4.3 Combustion gas discharge 4.1 Bottled gas connection4.2 Room ventilation 5. Adapting to different types of gas 5.1 Removing the hob skin 5.4 Adjusting for natural gas 5.2 Adjusting for bottled gas5.3 Adjusting for town gas Nominal BurnerheatBottled gas - G30/G31 30/37 mbar capacity kW 5.8 Adjusting the minimum for bottled gas 5.5 Adjusting the primary air flow5.7 Adjusting the minimum setting for natural gas and town gas 5.6 Reassembling the hob skin Burner type 5.9 Hob burner layout5.10 Greasing the gas taps 6.1 The front panel Instructions for the User6. Description of controls 7.3 Practical hints for using the burners 7. Using the hob7.1 Lighting burners with safety device 7.2 Positioning the griddle plate 8.2 Cleaning the components 8. Cleaning and maintenance8.1 Cleaning stainless steel Page 914773119/ B