914773119/ B | Smeg PTS723-3 instruction

Image 16

Smeg PTS723-3 manual 914773119/ B

Contents

Table of Contents 1. Precautions for safety and use 2. Fitting the appliance in the top7. Using the hob 8. Cleaning and maintenance Precautions for Safety and Use 1. Precautions for safety and useNEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD NEVER ATTEMPT TO REPAIR THE APPLIANCE YOURSELF 2. Fitting the appliance in the top Instructions for the Installer2.1 Fixing to the supporting structure Fit the insulating gasket provided carefully around the outside edge of the hole made in the top as shown below, pressing it down with your hands so that its entire surface fits snugly. Follow the dimensions shown, depending on the model of hob to be installed, bearing in mind that on both models the long front edge must be flush with the hole. Fix the hob to the structure using the brackets A provided. Carefully trim off the excess edge of the gasket B. The dimensions in the drawing below refer to the hole on the inside edge of the gasket 3. Electrical connection 4. Gas connection 4.2 Room ventilation 4.1 Bottled gas connection4.3 Combustion gas discharge 5. Adapting to different types of gas 5.1 Removing the hob skin 5.2 Adjusting for bottled gas 5.3 Adjusting for town gas5.4 Adjusting for natural gas Nominal BurnerheatBottled gas - G30/G31 30/37 mbar capacity kW 5.5 Adjusting the primary air flow 5.7 Adjusting the minimum setting for natural gas and town gas5.8 Adjusting the minimum for bottled gas 5.6 Reassembling the hob skin 5.10 Greasing the gas taps 5.9 Hob burner layoutBurner type 6. Description of controls Instructions for the User6.1 The front panel 7. Using the hob 7.1 Lighting burners with safety device7.3 Practical hints for using the burners 7.2 Positioning the griddle plate 8.1 Cleaning stainless steel 8. Cleaning and maintenance8.2 Cleaning the components Page 914773119/ B