Instructions for the user
9.2.2 Removing doors with pins
Open the door completely and insert the pins (supplied) into the slots from the inside. Close the door to an angle of about 45° and lift it to remove it. To remount the door, fit the hinges into their grooves, then lower the door into place and extract the pins. In case you lose the pins, two screwdrivers can also be used.
9.3 Removing the internal glass panes
WARNING
Before removing the glass panes, make sure that at least one of the door's hinges has been locked in the open position as described in paragraph “9.2 Removing the oven door”. This operation might have to be repeated during the glass removal process if the door is accidentally freed.
Do not use the appliance without the glass inserted, otherwise the external surface of the door will overheat.
The glass in the door should always be kept thoroughly clean. For easier cleaning, it is possible to remove the door (see 9.2 Removing the oven door) and place it on a canvas; or open it and block the hinges in order to extract the glass panes.
The glass panes of the door can be completely removed by following the instructions provided below.
Removing the internal glass:
•Remove the internal glass pane by pulling it
towards you, following the movement indicated by the arrows. Doing this dislodges the 4 pins attached to the glass from their slots in the oven door.
Removing the middle glass panes:
• Remove the middle panes by lifting them upwards.
28
