Smeg SCP111BU2 Setting the self cleaning cycle, During and after the self cleaning cycle

Instructions for the user

8.8 Setting the self cleaning cycle

1 With the oven ON, use PT2 to select the self cleaning function.

2To start the self cleaning cycle, press knob PT1 twice to set its duration.

3Turn knob PT1 to the right or left to increase or decrease the cycle duration between a minimum of 1h 30m and a maximum of 3h 00m.

4 The message "CLEA" will appear on DSP1 to indicate that the oven is performing the cleaning cycle.

5 The time remaining until the end of the cleaning cycle will be shown on DSP1.

8.9 During and after the self cleaning cycle

Two minutes after the self cleaning cycle, an interlock device will activate, preventing the door from being opened. The symbol lights on DSP2 to indicate that this interlock device has been activated.

At the end of the cleaning cycle the door interlock device will remain active until the temperature inside the oven has reached a safety threshold. When the oven has cooled down, remove the residues from the automatic cleaning cycle with a damp micro-fibre cloth.

Once the door interlock has been activated, no oven functions can be selected.

Wait for the symbol to turn off.

8.10 Setting the self cleaning cycle with delayed start

1Repeat steps 1, 2 and 3 described in “8.8 Setting the self cleaning cycle”.

2After setting the duration, press PT1 once. The symbol and the current time will appear on the display.

3Turning PT1 to the right increases the time, allowing the desired cooking start time to be set.

4A few seconds after the desired duration is set, the symbols stay on, and the oven will start to wait for the starting time setting for the cleaning cycle.

26