Instructions for the User
9. SPECIAL MAINTENANCE
The oven may require special maintenance or replacement of parts subject to wear such as seals, bulbs, etc. The following instructions describe how to do these minor maintenance operations.
WARNING | ELECTRICAL SHOCK HAZARD |
Before any maintenance operation, disconnect the power supply of the appliance.
9.1 Replacing the oven light
Remove upper oven protection A and ring B as well as the glass
cover C, unscrewing it
anticlockwise. Replace light bulb D.
Reassemble ring B, cover C and upper protection A.
CAUTION: The standard bulbs are halogen: do not touch them directly with your fingers. Use insulation to protect your hand. Use only bulbs that are available at authorized service centers.
NOTE: use only oven bulbs (T 950°F - 500°C)
9.2 Removing the oven door
9.2.1With moveable levers
With the door completely open, lift the levers A until they touch hinges B, then grip the two sides of the door with both hands close to the hinges. Raise the door to an angle of about 45° and remove it. If the hinges don't lock, repeat the operation, raising the levers and keeping the door slightly raised. To remount the door, fit the hinges B into their grooves, then lower the door into place, making sure that it remains in the grooves C, then lower the levers A.
27
