Smeg SCP111NU2 Programmed cooking procedures, Using the timer, Modifying the time setting

Instructions for the User

5.5.3 Using the timer

Press PT1 once (either in the STAND-BY or ON mode). The display will show the figures (steady

on) and the

symbol (flashing). Turn PT1 to set the cooking time (from 00:01 to 04:00). A few

seconds after the desired duration is set, the

symbol will stop flashing and remain on; the

countdown will start from that moment. Now select the desired cooking function and wait for the buzzer to sound, indicating that the cooking time is over.

Press PT1 once to shut off the buzzer; the cooking time can be extended by turning PT1.

If the timer was set in STAND-BY mode, when the oven is activated in ON mode (selection of a cooking operation), the counter is reset to zero.

Warning: the timer does not stop the cooking process. It only warns the user that the preset number of minutes have expired. Press PT2 to turn off the oven.

Modifying the time setting

After setting the countdown, press PT1 once. The symbol starts flashing; turn PT1 to change the set

duration. A few seconds after the last change, the symbol will stop flashing, and the countdown will restart from the new value.

5.6 Programmed cooking procedures

5.6.1 Semiautomatic cooking

Semiautomatic cooking is the function which allows a cooking operation to be started and then ended after a specific length of time that is set by the user.

Select a function (see paragraph “5.5 Selecting a function”) and press PT1 twice. The display will show

the figures and the symbol (flashing).

Turn PT1 to the right or left to set the cooking time (from 00:01 to 23:59). A few seconds after the desired

duration is set, the symbol will stop flashing and semiautomatic cooking will start from that moment.

At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 to deactivate it.

If you wish to continue cooking beyond the set time, press PT1 again. The oven will restart normal operation with the cooking settings selected previously. PT2 has to be pressed to turn the oven off completely.

Modifying the setting

Once semiautomatic cooking has started, its duration can be changed.

When the symbol is steady on and cooking is in progress, press PT1 once. The symbol starts

flashing and PT1 can be turned to change the set duration. A few seconds after the last change, the symbol will stop flashing, and semiautomatic cooking will restart from the new value.

To change the preset temperature, wait for the symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.

15