1.Attaching:
a. Attach the cart to the tractor by aligning the two ends of the
b . Attach the cart to the bracket at points‘%” or“C”.
Figure 26.
DUMPING GRASS AND LEAVES
1.Back the tractor to the desired place for unloading. Shut the tractor’s engine off before getting off the
tractor’s seat.
2.Unhook the strap from the door lock and raise the cover assembly to the open position. Lock the cover in place by hooking the strap to the locking tab (figure 27).
Figure 27.
3. Move the latch handle to the unlock position and dump the cart’s box. The connecting tube will slide off the elbow and the cart’s box will dump at a 90 degree angle for quick unloading.
4 . If bagging the grass clippings is desired, the grass can be pulled from the cart at the curve side into a plastic lawn bag. Also, the grass can be dumped onto a tarp for throwing into a trailer.
AWARNING
For safety reasans gross and debris are to be removed only after engine is shut off, key removed, and all moving ,parts stopped.
AWARNING
Before raking cover, shut off engine, remove key, and set parking brake.
ACAUTION
Do not haul sharp objects that may puncture the cover.
.
5.The cover can be removed entirely from the cart. Once the cover is removed, the cart can be used for hauling bulky loads.
A CAUTION
Be sure to store the cover in P safe place where it cannot he torn.
OPERATING WITHOUT COLLECTION SYSTEM - 42” & 48” MOWERS
AWARNING
When blower assembly is removed from mwver deck, the deflector must be installed as described in this section.
To operate without the grass collection system, remove the blower assembly by removing the front wing nut (C, figure 25) and slipping belt off of the pulley.
Pivot the cover (A, figure 29) over the arbor pulley and hook into position.
12
