Snapper 1694296, 1694295, 1694144, 1694150 Mount Remote Deflector Control, Initial Setup & Assembly

Initial Setup & Assembly

Mount Remote Deflector Control

1.Using the template included in the back of this manu- al, drill two 9/32” holes in the dashboard to mount the remote chute control. See MOUNTING REMOTE DEFLECTOR CONTROL on page 22.

2.Mount the mounting bracket (E, Figure 16) to the dashboard. Secure with two 1/4-20 x 7/8 capscrews (A), lockwashers (C), and large flat washers (B).

3.Install the remote deflector control handle (B, Figure 17) in the mounting bracket (C) and secure with a clevis pin (A) and hair pin clip (D).

	E
D	A
C	B

Figure 16. Mount Control Bracket - Current Models

A. 1/4-20 x 7/8 Capscrews	D. 1/4-20 Nuts
B. 1/4 x 1-1/4 Flatwashers	E. Mounting Bracket
C. 1/4 Lockwashers

A

B

C

D

Figure 17. Install Remote Deflector Control

A.Clevis Pin

B.Deflector Control Handle

C.Mounting Bracket

D.Hair Pin Clip

18