Maintenance

WARNING

To avoid serious injury, perform maintenance on the unit only when the engine is stopped, parking brake is set and all moving parts have stopped.

Always remove the ignition key before beginning maintenance or adjustments to prevent accidental starting of the engine.

Schedule For Normal Care

Care Required

Schedule

 

 

Clean snow and ice from

After each use.

snowthrower.

 

Lubricate snowthrower.

Every 10 hours or at

 

least once a year.

Inspect, adjust and

Once a year or more

lubricate drive chain.

often under frequent

 

use.

 

 

General Lubrication

Lubricate the snowthrower as shown in Figure 2. Where an oil can is shown use 30 weight oil. Where a grease gun is shown, use lithium grease.

Lubricate Discharge Chute

Lubricate the ring gear at the base of the discharge chute with lithium grease. Lubricate the deflector hinge, extension linkage, and cable with oil (see Figure 2).

Figure 2. Lubrication Points

9

Page 10
Image 10
Snapper 1694150, 1694295, 1694144, 1694296 manual Schedule For Normal Care, General Lubrication, Lubricate Discharge Chute