STEP9: Installbeltguardbetweenpulleyguard andbeltguardsupportclipon frontpartof blower mount.Securewith two 5/16 nylonwing nuts. Tightennutssecurely.
WEIGHT KIT INSTALLATION
!!Warning: Weight kit must be installed prior to installing bagger unit. Failure to do so may result in Iongitudal tipping of unit.
STEP 10: Insert the four narrow weight bars through opening in side of foot rest. Be sure holes in weights are all aligned. Next, insert the two 1/2- 13 x 5 bolts through the five wide weight bars, and lay the wide bars against front of footrest, inserting bolts through holes in narrow bars. Secure with 1/2" split lock washers and nuts. Tighten securely.
BAGGER KIT INSTALLATION
STEP 11: Install bumper mount standoffs onto rear bumper of machine, utilizing existing hardware on machine. NOTE: Invert hardware when installing standoffs, installing bolts out through bumper with nuts facing out.
NOTE: When installing standoffs, be sure that the
bumper mount plate mounting holes along the back bar of the standoffs are located towards the
right side of the machine. Refer to the Parts List section of the manual.
STEP 12: Install bumper mount plate onto stand- offs with four
Also, install muffler deflector (see inset) onto muf- fler, making sure deflector directs exhaust off to the
side of the mower. Fasten with clamp.
IMPORTANT: FAILURE TO INSTALL MUFFLER DEFLECTOR MAY RESULT IN A FIRE.
I
7