Socket Mobile Ethernet Blaster Communications Cable Changing the Administrative Password

Managing Passwords

1When you change the Quartus II remote connection password, client systems using the EthernetBlaster communications cable must remove the hardware from their Quartus II Programmer hardware setup. See Chapter 1, “Removing the EthernetBlaster Hardware from the Quartus II Software Programmer Hardware Setup” for details. The hardware then needs to be added back into the Quartus II software. See Chapter 1, “Setting Up the EthernetBlaster Hardware in the Quartus II Software” for details.

Changing the Administrative Password

To change the administrative password, follow the directions below:

1.Open and log into the EthernetBlaster administrative web page in your browser.

1See Chapter 1, “Setup,” for instructions on accessing the administrative web page using your specific connection.

2.Click the Change Admin Password tab. See Figure 2–1below.

Figure 2–1. Change Admin Password Page

3.Enter the new administrative password in the New Password field and again in the Confirm New Password field. Click Apply.

2–2	Altera Corporation
EthernetBlaster Communications Cable User Guide	December 2004