Socket Mobile Ethernet Blaster Communications Cable Revision History, How to Contact Altera

Revision History

■Refer to the following procedures in Quartus II Help:

●Programming a Single Device or Multiple Devices in JTAG or Passive Serial Mode

●Programming a Single Device in Active Serial Programming Mode

●Selecting the Communications Cable for the SignalTap II Logic Analyzer

■Refer to the following introduction and overview topics in Quartus® II Help:

●Programmer Introduction

●Overview: Working with Chain Description Files

●Overview: Converting Programming Files

Revision History		The table below shows the revision history of this user guide.
Chapter	Date	Version	Changes Made
All	December 2004	1.0	Initial release

How to Contact Altera

For the most up-to-date information about Altera products, go to the Altera world-wide web site at www.altera.com. For technical support on this product, go to www.altera.com/mysupport. For additional information about Altera products, consult the sources shown below.

Information Type	USA & Canada	All Other Locations
Technical support	www.altera.com/mysupport/	www.altera.com/mysupport/
	(800) 800-EPLD (3753)	(408) 544-7000 (1)
	(7:00 a.m. to 5:00 p.m. Pacific Time)	(7:00 a.m. to 5:00 p.m. Pacific Time)
Product literature	www.altera.com	www.altera.com
Altera literature services	lit_req@altera.com (1)	lit_req@altera.com (1)
Non-technical customer	(800) 767-3753	(408) 544-7000
service	(7:00 a.m. to 5:00 p.m. Pacific Time)	(7:00 a.m. to 5:00 p.m. Pacific Time)
FTP site	ftp.altera.com	ftp.altera.com

Note:

(1)You can also contact your local Altera sales office or sales representative.

3–6	Altera Corporation
EthernetBlaster Communications Cable User Guide	December 2004