Socket Mobile Ethernet Blaster Communications Cable Changing the Quartus II Remote Connection Password

EthernetBlaster Communications Cable Administration

The new password takes effect immediately when logging back into the administrative web page.

1The EthernetBlaster communications cable does not restart when the administrative password is reset.

Changing the Quartus II Remote Connection Password

To change the Quartus II remote connection password, follow the directions below:

1.Open and log into the EthernetBlaster administrative web page in your browser.

1See Chapter 1, “Setup,” for instructions on accessing the administrative web page using your specific connection.

2.Click the Change EthernetBlaster Settings tab. See Figure 2–2below.

Figure 2–2. Change Quartus II Remote Connection Password Page

3.Enter the new Quartus II remote connection password in the New Password field and again in the Confirm New Password field. Click Apply.

Altera Corporation	2–3
December 2004	EthernetBlaster Communications Cable User Guide