Resetting the Hardware

Resetting the Hardware

The EthernetBlaster communications cable restarts. When the status LED emits a steady green light, the EthernetBlaster has successfully reset and the new password is effective.

The EthernetBlaster communications cable reset button is located on the Ethernet port side of the hardware. See Figure 2–3.

Figure 2–3. Machine Reset button

ETHERNET DC12V

Machine Reset

Paper clip

Use a small pointed object such as a paper clip to press the machine reset button to restart and reset all values to the default factory settings. See Table 2–1for a list of factory default settings.

Table 2–1. Default Factory Settings

Setting

Value

 

 

Connection Type

DHCP

 

 

Host name

acebXXXX (1)

 

 

Domain name

Clear

 

 

Timeserver Name/IP

Clear

 

 

IP Address

192.168.0.50

 

 

Subnet Mask

255.255.255.0

 

 

Default Router

192.168.0.1

 

 

DNS Server 1

0.0.0.0

 

 

DNS Server 2

0.0.0.0

 

 

Administrative Password

password

 

 

Quartus II Remote Connection Password

password

 

 

Note:

(1)The host name and MAC address are located on the label on the base of your cable. The last 4 digits of the MAC address represent the “XXXX” in the host name.

2–4

Altera Corporation

EthernetBlaster Communications Cable User Guide

December 2004