3.First follow the reverse order of the steps described in Section 2-5 Installing HDD in Removable Carrier to remove the damaged HDD, and then replace it with a new HDD.

4.Insert the Removable Carrier with the new HDD into the SR2000.

5.Wait a moment. The SR2000 will automatically perform rebuild function on the new HDD. (Refer to Chapter 4 Automatic Rebuild Function)

6.Use a sharp pointed object to turn on the buzzer on the front panel. The Access LED on the lower part of the panel will be off. (Refer to Note 2).

7.After the rebuild process is over, any data on the newly installed HDD will be overwritten.

Note1Alarm functions when buzzer switch is "On".

Note2Buzzer access LED displays red when buzzer switch is "Off".

16

SOHO RAID

Page 17
Image 17
Soho SR2000 user manual Soho RAID