Note the solder connections on the terminal block. Under no circumstances should these connections be tampered with.
4.Using the slot screwdriver provided with the amp, deal with one connection at a time, loosening off the tap screws of the first spade lug connection and tightening to the desired tap. The final connections should resemble these renderings:
8 Ohm Impedance Connections
FRONT OF
THE AMPLIFIER
4 Ohm Impedance Connections
FRONT OF
THE AMPLIFIER
2 Ohm Impedance Connection
FRONT OF
THE AMPLIFIER
5. Repeat for each channel.
6.Ensure all 12 screws per terminal block are tightened so there is no chance of them vibrating loose.
7.Replace the bottom cover and all external connections.
11
