Overview 1 Chapter

Displaying Various Data

7Time counter (time code/user bits/count value of the counter) indicator

Displays the count value of the counter, time code, or user bits. By pressing the COUNTER SELECT button on the front panel, you can select the item to be displayed.

When the time code is displayed, TC appears to its left. In the drop frame mode, a period is displayed between the minutes and seconds (i.e., 00:12.58:00).

When the user bits are displayed, UB appears to their left.

When the count value of the counter is negative, “–” appears as the first digit (leftmost digit). When that value is positive, the first digit is blank.

The count value of the counter consists of seven digits. If the self-diagnostic function is enabled, diagnostics code numbers are displayed.

Note

When you playback a tape without a time code or with a time code recorded in different formats, the time code cannot be displayed correctly.

8Remaining tape time indicator Displays the remaining tape time.

For details, see “ REMAINING” on page 72.

Note

When you insert a cassette in which the tape has been rewound to the beginning, this indicator does not show the remaining tape time. The remaining tape time is displayed after the tape runs for a while.

9INPUT SELECT indicator

Changes according to the position of INPUT SELECT switch. ([HDV/DV IN], [S VIDEO IN] or [VIDEO IN])

0(Index) indicator

Displays when an index has been marked.

qa Search indicator

Displays the search mode when you search for scenes using Remote Commander.

For details on the search function, see “Searching using the search function” on page 38.

qs Audio mode indicator

 

In the recording mode, displays

when you select

[FS32K] for [AUDIO MODE] in [AUDIO SET]

menu. When you select [FS48K],

is displayed.

During playback or audio dubbing, displays the audio mode recorded on the tape. During i.LINK input, displays the audio mode of the signal input to HDV/ DV jack.

Notes

•The audio mode will not be displayed when [HDV/ DV SEL] in [IN/OUT REC] menu is set to [HDV].

•Signals other than HDV/DVCAM lock mode will

become non-standard audio and / is displayed during playback or when the signal is input from HDV/DV jack.

qd Date/time and camera data indicator

When you press DATA CODE button of Remote Commander or set [DATA CODE] in [DISPLAY SET] menu to [DATE] or [CAMERA DATA], you can switch the display between recording date/time and camera data.

For details on the date/time and camera data indicator, see “Displaying information (data codes) recorded on a tape” on page 36.

Time counter screen

To display the time counter on LCD panel, press DISPLAY button. On the time counter screen, it displays the time data (count value of the counter/time code/user bits).

While the time counter is displayed, the position of the time counter moves up and down by pressing J/j buttons. When the small size time counter is displayed, the position of the time counter moves not only to the up and down, but also to the left and right by pressing K/k buttons.

00:10:26:12

26 Chapter 1 Overview