Dubbing sound

1 Connect AUDIO INPUT jack of the unit and the sound source using a phono jack cable (not supplied).

2 Set INPUT SELECT switch to a setting other than HDV/DV.

3 Switch AUDIO INPUT LEVEL switch to select the audio input signal level (–10, –2 or +4).

4 Play back the tape inserted in the unit.

5 At the point you want to start dubbing, press PAUSE button to turn the unit to the playback pause mode.

6 While holding AUDIO DUB button down, press PLAY button to turn the unit to the audio dubbing pause mode.

AUDIO DUB indicator on the unit lights.

7 Set AUDIO INPUT switch to set the adjusting method of the recording level.

8 Adjust the recording level by turning AUDIO REC LEVEL control knobs.

You can adjust the recording level with AUDIO REC LEVEL control knobs if you have selected MANU in step 7. While looking at the audio level meters on STATUS CHECK screen, turn AUDIO REC LEVEL control knobs and adjust the recording level. Adjust the audio recording level so that the recording level does not exceed 0 dB when the audio signal is at its maximum. If the recording level exceeds 0 dB, the sound will be distorted.

9 Press PAUSE button.

PAUSE indicator goes off and audio dubbing starts.

To pause audio dubbing

Press PAUSE button.

Pressing PAUSE button again resumes audio dubbing.

To stop audio dubbing

Press STOP button.

To monitor the sound you want

Set AUDIO OUTPUT SELECT switch as follows: CH-1/2:You can listen to sound recorded on

channels 1/2 on the tape.

CH-3/4:You can listen to sound to be dubbed on channels 3/4.

MIX: You can listen to the sound on the tape and the dubbed sound.

For details on the audio levels display in the audio dubbing mode, see page 27.

Notes

•You can monitor the sound on the tape while dubbing the sound. However, there are some delays between the sound being recorded and the sound being played. When you play back the tape after audio dubbing, you might hear the dubbed sound later than the sound monitored during audio dubbing.

•You cannot dub sounds onto a blank portion of the tape.

Computer a with Connecting and Dubbing, Audio Duplication, jack, LINK.i using equipment another to Dubbing 4 Chapter

Chapter 4 Dubbing to another equipment using i.LINK jack, Duplication, Audio Dubbing, and Connecting with a Computer

61