Overview 1 Chapter

Displaying Various Data

(b)When AUDIO OUTPUT SELECT switch is set to

MIX

AUDIO

1/4

AUDIO MONI: CH1 , CH2

[ STATUS CHECK] : END

(The mixed level of channels 1 and 3 is displayed on CH1/3; that of channels 2 and 4 is displayed on CH2/4. The audio output level becomes 50% (–6 dB) of the original audio levels.)

(c)When the unit is in the audio dubbing mode and AUDIO OUTPUT SELECT switch is set to CH-1/2 or CH-3/4

AUDIO

1/4

AUDIO MONI: CH1 , CH2

[ STATUS CHECK] : END

(The levels of playback sound are displayed on CH1 and CH2. The levels of input sound to be dubbed are displayed on CH3 and CH4. When AUDIO OUTPUT SELECT switch is set to MIX, the mixed level of the pair of channels 1 and 3 and that of channels 2 and 4 is displayed. The audio output level becomes 50% (–6 dB) of the original audio levels on each channel. In this case, the meters are as illustrated in (b) on this page. To check only the sound to be dubbed before dubbing, press AUDIO DUB button while the unit is in the stop mode. The level meters fluctuate only when the channels (channel 3 and 4) are selected for audio dubbing.)

Note

In EE, recording, or audio dubbing (only the channels used to dub) mode, if the input levels exceed 0 dB, the portions of the meters turn red. (However, when the audio mode is set to 32 kHz (4-channel,12 bits), whereas AUDIO OUPUT SELECT switch is set to MIX, the mixed audio levels that exceed 0 dB do not turn red.) During playback or while HDV/DV signals are input, the levels meters do not turn red.

OUTPUT screen

OUPUT screen is displayed when STATUS CHECK is set to [OUTPUT].

You can confirm the setting values of [HDV/DV SEL] in [IN/OUT REC] menu, [HDMI/CMPNT] and [DOWN CONVERT] of [VIDEO OUT], and [HDV t DV CONV] and [DOWN CONVERT] of [i.LINK SET] in [IN/OUT REC] menu.

For details on OUTPUT settings, see “IN/OUT REC” menu on page 67.

OUTPUT

2/4

HDV/DV SEL :

AUTO

VIDEO OUT

 

 

 

 

 

 

HDMI/CMPNT :

1080i / 480i

DOWN CONVERT : SQUEEZE i.LINK SET

HDVpDV CONV : OFF

DOWN CONVERT : SQUEEZE [ STATUS CHECK] : END

ASSIGN screen

ASSIGN screen is displayed when STATUS CHECK is set to ASSIGN.

You can confirm the setting values of [ASSIGN BTN] in [OTHERS] menu.

For details on ASSIGN buttons, see “ASSIGN BTN” on page 77.

ASSIGN

3/4

ASSIGN [ A1 ] :

INDEX MARK

ASSIGN [ A2 ] :

COUNT. RESET

ASSIGN [ A3 ] :

AUDIO DUB

[ STATUS CHECK] : END

CUSTOM REPEAT screen

CUSTOM REPEAT screen is displayed when STATUS CHEK screen is set to [CUSTOM REPEAT].

The settings of [CUSTOM REPEAT] in [VTR SET] menu are displayed. While CUSTOM REPEAT is in progress, you can also confirm the current status of

CUSTOM REPEAT.

1

CUSTOM REPEAT

 

4/4

 

 

 

 

 

sc

 

2

REMAINING :

5h20min

 

 

REPEAT TIMES :

07/99

 

 

3

REPEAT CYCLE :

23min/60min

 

 

START TIME :

12 : 34

 

5

4

 

2006 5 1

12 : 00 : 00

 

[ STATUS CHECK] : END

 

 

 

 

 

 

 

 

 

 

 

28 Chapter 1 Overview