Recording and Playback 2 Chapter

Playback

Playback Functions

This section describes useful functions during playback.

Displaying information (data codes) recorded on a tape

If you record on a tape using a Sony digital HD video camera recorder or digital camcorder, the recording information (data codes) is recorded on the tape.

The data codes consist of recording date/time and camera data (the shutter speed, SteadyShot, iris, white balance, program AE mode, gain, date and time).

You can check these data items during playback on the unit.

Each time you press DATA CODE button on Remote Commander, the display changes in sequence as follows:

no data code t recording date/time t camera data t no data code ..... Also, you can change the display

by setting [DATE] or [CAMERA DATA] of [DATA CODE] in [DISPLAY SET] menu.

For details, see “DATA CODE” on page 72.

No indicator

Recording date/time

 

 

Date

2006 1 1

19 : 20 : 30

Time

Camera data

SteadyShot

Program AE

Iris

Gain

AUTO

ATW

White balance

Shutter speed

Notes

•If data codes were not recorded, “- - -” appears instead.

•The unit cannot record camera data.

•Some of the camera data items displayed by the unit are different from those shown on the digital camcorder and digital HD video camera recorder.

36

Chapter 2 Playback and Recording