Editing (Connecting with a Computer)

Duplication, jack, LINK.i using equipment another to Dubbing 4 Chapter

You can set up an editing system by connecting the unit to a computer (editing machine) using HDV/DV jack on the unit.

•For details on the connecting method to the editing machine, refer to the supplied instruction manual of your editing unit.

•The editing functions you can use depend on the editing software. For details on editing methods, refer to the instruction manual of your editing software.

Connecting the Unit to a

Computer

HVR-M25 (rear panel)

i.LINK cable (not supplied)

Notes

•Be sure to connect the i.LINK cable to a computer (editing machine) first and then connect it to the unit. If you connect the i.LINK cable to the unit first, it may cause the unit to malfunction because of static electricity.

• If no picture appears via HDV/DV jack, disconnect the i.LINK cable, then reinsert it straight.

•If the unit is connected to a device equipped with an i.LINK jack, when you intend to disconnect or reconnect the i.LINK cable, turn off the device and pull out the plug of its power cord from the wall outlet beforehand. If you connect or disconnect the i.LINK cable while the device is connected to the AC outlet, high-voltage current (8 to 40 V) is output from the i.LINK jack of the device to the unit, which may cause a malfunction.

•Before connecting the i.LINK cable, set [HDV/DV SEL] and [i.LINK SET] in [IN/OUT REC] menu. If you perform the settings after connecting the cable, the computer (editing machine) may not recognize the unit correctly or may freeze.

•If you input or output signals in a format incompatible with the computer (editing machine), the computer may not recognize the unit correctly or may freeze.

•When set to EE mode, the unit outputs analog signals

those are input from HDV/DV jack to a computer. S VIDEO or VIDEO signals are output from HDV/ DV jack, according to the setting of INPUT SELECT switch. To output the playback image from the unit through HDV/DV jack only, set INPUT SELECT switch to HDV/DV.

Computer a with Connecting and Dubbing, Audio

Computer (editing machine)

62

Chapter 4 Dubbing to another equipment using i.LINK jack, Duplication, Audio Dubbing, and Connecting with a Computer