Icon/Menu | Submenu | Setting |
| ||
IN/OUT REC | i.LINK SET | Adjusts the down conversion format. This menu is available when [HDV/DV SEL] is set to | |||
| (pages 34, 54) [AUTO] or [HDV]. |
| |||
|
| HDV t DV CONV | |||
|
|
| OFF | : | Disables down conversion. |
|
|
| DVCAM : | Down converts to DVCAM format. | |
|
|
| DV SP : | Down converts to DV SP format. | |
|
| DOWN CONVERT | |||
This setting is available when [HDV t DV CONV] is set to [DVCAM] or [DV SP].
SQUEEZE : Plays back with compressed horizontal screen image and maintains all images on display. Images appear vertically long.
EDGE CROP : Plays back with both left and right sides of the screen images cut off and maintains the original image appearance.
| Notes |
|
| ||
| • When [DVCAM] is selected, there are some limitations described below. | ||||
|
| – ATN (Absolute Track Number) outputs the value counted in DVCAM format during | |||
|
| playback at regular speed (⋅1) or recording of the internal color bars only. | |||
|
| During playback at irregular speeds other than described above, ATN outputs the value | |||
|
| of a tape recorded in HDV format. | |||
|
| – When the unit is playing back at regular speed (⋅1) while detecting a blank portion on | |||
|
| the tape, the unit counts the blank portion as | |||
|
| – When using the duplicating function that is equipped with a device such as the | |||
|
| 45/50, select [DVCAM]. | |||
|
| – Please note that a duplicated tape and the source tape recorded in HDV format with | |||
|
| [DVCAM] selected do not share the same ATN (Time code value is displayed | |||
|
| correctly). |
| ||
| • When you change the video format setting of [DOWN CONVERT] of [i.LINK SET] in [IN/ | ||||
|
| OUT REC] menu, the video signal output from COMPONENT OUT jacks, S VIDEO OUT | |||
|
| jack, or VIDEO OUT jack may be distorted for a moment. | |||
| • Before changing your setting, be sure to disconnect the i.LINK cable. If you change the | ||||
|
| setting while i.LINK is connected, the video device may not recognize the new setting. | |||
| • When you select [EDGE CROP], the outputs of S VIDEO and VIDEO are limited. | ||||
|
| For details, see page 85. | |||
|
|
|
|
| |
CROP | Adjusts the position of edge cropping when down converting 16:9 to 4:3 aspect ratio. | ||||
ADJUST | Adjusts the position of the crop marker by pressing K/k buttons to move either left or | ||||
(page 41) | right, and press EXEC button to finish. (You can also use J/j buttons.) | ||||
|
|
|
|
| |
CROP | Selects whether to display EDGE CROP MARKER or not. | ||||
MARKER |
| OFF | : | Does not display the crop marker. | |
(page 41) |
| ON : |
| Displays the crop marker. | |
Notes
•This setting is only available, when [DOWN CONVERT] of [VIDEO OUT] or [i.LINK SET] in [IN/OUT REC] menu is set to [EDGE CROP].
•EDGE CROP MARKER is displayed when
CROP MARKER is also displayed when HDV signals are input to HDV/DV jacks.
Menus Through Setting and Adjusting 5 Chapter
(Continued)
Chapter 5 Adjusting and Setting Through Menus 69