Recording and Playback 2 Chapter
Playback
MARKER BURN
The unit can output to each video jacks and display 4:3 screen marker on the 16:9 screen images. In case of making an editing tape from the original tape, [MARKER BURN] can be used.
To set up MARKER BURN
Set [MARKER BURN] in [DISPLAY SET] menu to [ON].
Notes
•MARKER BURN is effective under the following conditions.
– While playing back a tape in HDV or an HDV
signal is input via HDV/DV jack, and [DOWN CONVERT] of [VIDEO OUT] in [IN/OUT REC] menu is set to [SQUEEZE] or [LETTER BOX].
–When wide signals recorded in DVCAM or DV format are played back, or wide screen HDV/ DVCAM/DV signals are input to each VIDEO jacks.
•When [DOWN CONVERT] of [VIDEO OUT] in [IN/OUT REC] is set to [EDGE CROP], the marker can not be displayed.
•The markers displayed with EDGE CROP and MARKER BURN show the available horizontal ratio range of the 4:3 screen to be cropped. The displayable image size of the standard 4:3 TV monitor may appear smaller than the size marked on the monitor of the unit.
•When the EDGE CROP MARKER and MARKER BURN are enabled at the same time, the EDGE CROP MARKER is displayed as priority.
•When you set [MARKER BURN] and [ALLSCAN MODE] in [DISPLAY SET] menu to [ON] at the same time, the marker will not appear in the correct position on LCD monitor. This is not a malfunction. The marker will be output correctly via each video jack.
42 | Chapter 2 Playback and Recording |