Notes
•Before you start duplication, make sure that the player has finished loading the cassette.
•The duplication starts after the i.LINK connection is established so that the first part of the source tape is dropped on the copied tape.
•If the player has functions such as auto repeat, set them to OFF.
•If the player has a still timer function, set the still timer to the longest time to ensure enough time for rewinding the tape to the beginning.
•When you use a
•If you operate the player while duplicating and the PLAYER UNCONTROLLABLE warning message appears and duplication stop, press EXEC button on the unit to end duplication once and repeat the procedures.
When [AUTO REW] in [DUPLICATE PLUS] is set to [OFF]:
1 Connect the unit and the player using an i.LINK cable (not supplied). After turning on power of the unit and the player, set INPUT SELECT switch on the unit to HDV/DV.
2 Locate the points where you want to start playback and recording on each tape.
3
4 While holding DUPLICATE PLUS button down, press PLAY button on the unit.
The unit enters the
To adjust the point where duplication starts, while holding DUPLICATE PLUS button down, press PAUSE button and PLAY button in step 4. The unit will not start duplication until you press PAUSE button again.
After confirming that the PLAYER display has changed to [READY] (blinking) on LCD monitor, adjust the duplication start point using the player, then press PAUSE button on the unit to start duplication.
Notes
•Before you start duplication, make sure that the player has finished loading the cassette.
•The duplication starts after the i.LINK connection is established so that the first part of the source tape is dropped on the copied tape. Play back the tape a few frames back of the portion where you want to begin the duplication.
•If the player has functions such as auto repeat, set them to OFF. Also, when the player has an auto rewind function, set the function to ON.
•You may not duplicate the beginning of the source tape. Locate the recorded portion on the source tape, and then start duplication.
•If there is a blank portion on the tape, the first part of the recorded portion that follows may be dropped on the copied tape.
•When the time code on a player operates either discontinuously or incorrectly, the difference in frame values between the numeric time codes may occur.
To cancel duplication
1 Press STOP button on the unit, and pause duplicating.
While pausing, the following confirmation display appears.
00 :12:34 :12
DUPLICATE PLUS
Can adjust start position or change cassette.
[ X ] : RESTART | [ x ] : END |
2 Press j button.
Duplicating mode ends.
Computer a with Connecting and Dubbing, Audio Duplication, jack, LINK.i using equipment another to Dubbing 4 Chapter
Chapter 4 Dubbing to another equipment using i.LINK jack, Duplication, Audio Dubbing, and Connecting with a Computer | 57 |