Troubleshooting

Battery pack and power

Cannot insert the battery pack.

Insert the battery pack correctly to push the battery eject lever.

Cannot turn on the camera.

Insert the battery pack correctly.

The battery pack is discharged. Insert a charged battery pack.

The battery pack is dead (page 129). Replace it with a new one.

Use a recommended battery pack.

The power turns off suddenly.

If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the battery pack. Turn on the camera again.

The battery pack is dead (page 129). Replace it with a new one.

The remaining charge indicator is incorrect.

This phenomenon occurs when you use the camera in an extremely hot or cold location.

A discrepancy arose between the remaining charge indicator and the actual remaining battery charge. Fully discharge the battery pack once, then charge it to correct the indication.

The battery pack is discharged. Insert a charged battery pack.

The battery pack is dead (page 129). Replace it with a new one.

Cannot charge the battery pack while it is inside the camera.

You cannot charge the battery pack using the multi-output stand (supplied) or AC Adaptor (not supplied). Use the battery charger to charge the battery.

112