Settings

For details on the operation 1 page 69

Initialize

Initializes the setting to the default setting. Even if you execute this function, the images stored in the internal memory are retained.

1Touch [Initialize].

The message “Reset to default settings” appears.

2Touch [OK].

The settings are reset to the default setting.

To cancel initializing

Touch [Cancel] or [BACK] in step 2.

• Be sure not to power off the camera while initializing.

Calibration

Enables you to perform calibration when the touch panel buttons do not react at the appropriate points where you touch.

Touch the “×” mark displayed on the screen with the corner of a “Memory Stick Duo” or the like.

To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that point are not effected.

The × mark moves on the screen.

If you fail to touch the right spot, the calibration is not performed. Touch the × mark again.

settings the Customizing

75