Step 3: TV and Video Component HookupsRequired cordsS Video cord for connecting a TV monitorAudio/Video cords (not supplied)

When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components.

Yellow (Video)

White (L/audio)

Red (R/audio)

Jacks for connecting video components

Connect a

To the

TV monitor

MONITOR (S VIDEO OUT or VIDEO OUT) jack

 

 

VCR

VIDEO 1 or VIDEO 2 (S VIDEO IN or VIDEO IN/AUDIO L/R IN) jacks

 

 

Digital satellite receiver

TV/SAT (S VIDEO IN or VIDEO IN/AUDIO L/R IN) jacks

 

 

Note

When the receiver is not set to “DVD” mode, no signal is output from the COMPONENT VIDEO OUT jacks.

Tip

When using the COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR) instead of the S Video jacks or the Video jacks, your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR). If your TV accepts progressive format signals, you must use this connection and set “COMPONENT OUT” to “PROGRESSIVE” in “SCREEN SETUP” (page 69).

Started Getting

continued

19US