The default distance setting for the speakers in relation to the listening position is shown below.
| 3m |
| (10ft) |
3m | 3m |
(10ft) | (10ft) |
3m |
|
|
| 3m |
(10ft) |
|
|
| (10ft) |
|
| 3m |
| |
|
| (10ft) |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Be sure to change the value in the Setup Display when you move the speakers.
FRONT | Front speaker distance from the |
3 m/10 ft | listening position can be set in 0.3 |
| metre (1 ft) increments from 0.9 to 6.9 |
| metres (3 to 23 ft). |
|
|
CENTER | Center speaker distance can be moved |
3 m/10 ft | up to 1.5 metres (5 ft) forward closer |
| to your listening position from the |
| front speaker position, in 0.3 metre |
| (1 ft) increments. |
|
|
SURROUND | Surround speaker distance can be |
3 m/10 ft | moved up to 4.5 metres (15 ft) closer |
| to your listening position from the |
| front speaker position, in 0.3 metre |
| (1 ft) increments. |
|
|
SURROUND | Surround back speaker distance can |
BACK | be moved up to 4.5 metres (15 ft) |
3m/10ft | closer to your listening position from |
| |
| the front speaker position, in 0.3 metre |
| (1 ft) increments. |
|
|
Notes
•When you set the distance, the sound cuts off for a moment.
•If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.
•Do not place the surround speakers farther away from your listening position than the front speakers.
You can vary the level of each speaker as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.
CENTER | Adjusts the level of the center | |
0 dB | speaker | |
| steps). | |
SURROUND | Adjusts the level of the surround | |
LEFT 0 dB | speakers | |
SURROUND | steps). | |
RIGHT 0 dB | ||
| ||
SURROUND | Adjusts the level of the surround | |
BACK 0 dB | back speaker | |
| 1 dB steps). | |
SUBWOOFER | Adjusts the level of the subwoofer | |
0 dB |
You can vary the balance of the left and right speakers as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.
FRONT Adjusts the balance between the front left CENTER and right speakers. The center position is
shown as
Use the VOLUME control on the receiver, or press VOLUME +/– on the remote.
xTEST TONEThe speakers will emit a test tone to adjust “LEVEL” and “BALANCE.”
OFF The test tone is not emitted from the speakers.
ON The test tone is emitted from each speaker in sequence. When “BALANCE” is selected, the test tone is emitted from both left and right speakers simultaneously. When “LEVEL” is selected, the test tone is emitted from only the speaker that you are adjusting.