Other Operations
Controlling Other Units with the Supplied Remote
By adjusting the remote signal, you can control your TV, satellite receiver or VCR with the supplied remote.
Notes
•If you enter a new code number, the code number previously entered will be erased.
•When you replace the batteries of the remote, the code number may reset itself to the default (SONY) setting. Reset the appropriate code number.
Tip
You can set the code number for your TV or satellite receiver separately.
Controlling TVs with the remoteTV ?/1
4 Press ENTER.
When registration is completed, the RM SET UP indicator flashes twice.
If registration is incomplete, the RM SET UP indicator rapidly flashes 4 times.
*Use the number buttons only to enter the code number of controllable TVs.
Code numbers of controllable TVsIf more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
Manufacturer | Code number |
SONY | 501,502 |
|
|
AIWA | 501,502 |
|
|
DAEWOO | 504,505,506,507,515,544 |
|
|
FISHER | 508 |
|
|
GOLDSTAR | 503,511,512,515,534,544 |
|
|
GRUNDIG | 517,534 |
|
|
HITACHI | 513,514,515,544 |
|
|
ITT/NOKIA | 521,522 |
|
|
JVC | 516 |
|
|
MAGNAVOX | 503,518,544 |
RM SET UP
Number* buttons
AV ?/1
MITSUBISHI/MGA 503,519,544
NEC503,520,544
PANASONIC 509,524
PHILIPS515,518
PIONEER509,525,526,540
RCA/PROSCAN | 510,527,528,529,544 |
ENTER
TV CH +/– 
TV/VIDEO TV VOL +/–
The RM SET UP indicator lights up.
2 Press TV [/1.The RM SET UP indicator flashes once.
3 Enter your TV manufacturer code (see the table) using the number buttons.SAMSUNG | 503,515,531,532,533,534,544 |
SANYO | 508,545,546,547 |
|
|
SHARP | 535 |
|
|
TELEFUNKEN | 523,536,537,538 |
|
|
THOMSON | 530,537,539 |
|
|
TOSHIBA | 535,540,541 |
|
|
ZENITH | 542,543 |
|
|
You can control your TV using the buttons below.
By pressing | You can |
TV [/1 | Turn the TV on or off. |
|
|
TV/VIDEO | Switch the TV’s input source |
| between the TV and other input |
| sources. |
|
|
| continued |