ConnectingOtherEquipment
Rear of ! V
VHF/UHF
toVHF/UHF in )ut ,,.,4._._,
toS VIDEO
E3::
DEOAUDIO-L(white)
to VIDEOAUDIO-R(red)
YC-15V/30V(notsupplied)
RK-74A(notsupplied)
toaudio output
1
_Signalflow
VHF/
UHF
output k\ \it
I
toS
video
output
VCR

n/l/

JPreparing for use
1Turn on the TV.
2 Press the TV/VIDEO button on the TV or on the Remote
Commander so that "VIDEO" appears on the screen.
When you cannot obtain a clear picture and/or sound
Make sure that the TV/VTR on the VCR is setto TV.
Reselect the channel you want to view with the controls on
the TV orthe Remote Commander.
About S video input
Video input and output signals can beseparated into Y
(luminance or brightness) and C (chroma or color) signals.
Usually these two signals are combined in aVCR and sent
as one signal to aTV. Separation of the Yand C signals
prevents them from interfering with one another, thereby
improving picture (especially color) quality.
This TV isequipped with an S video input jack through
which these separated signals can be input directly. This
way you can connect your S video-equipped VCR
separately from a non-S video VCR.
To return to TV mode
Press the TV/VIDEO button on the TV orRemote Commander so
thata channel number appears on the screen.
•For operating instructions, refer to the instruction manual
furnished with the VCR.
•If the picture or sound is affected, move the VCR away
from the TV.
• If S VIDEO is set to OFF, you cannot watch VCR
playback pictures from the S VIDEO input.
To set S VIDEO to ON, see "Watching aVideo with Your
S Video-Equipped VCR," p. 27.
4Chapter 1: Setting Up