Editing onto another tape
You can create your own video program by editing with any other h8 mm, HHi8,
jVHS,
Turn down the volume of the camcorder while editing. Otherwise, picture distortion may occur.
After connecting the camcorder to the VCR,
(1)Set the POWER switch to PLAYER.
(2)Insert a blank tape (or a tape you want to record over) into the VCR and insert your recorded tape into the camcorder.
(3)Play back the recorded tape on the camcorder until you locate the point where you want to start editing, then press P to put the camcorder in playback pause mode.
(4)On the VCR, locate the recording start point and put the VCR in recording pause mode.
(5)Press Pon the camcorder and VCR simultaneously to start editing.
To edit more scenes
Repeat steps 3 to 5.
To stop editing
Press p on both the camcorder and VCR.
30
