Playing a CD
The basic CD playback procedure and operations are explained below.
CD insertion slot
1 Press the POWER switch to turn on the player.
2 Insert a CD with its label side up into the CD insertion slot.
When you insert the CD, it is automatically pulled in and loaded.
To use headphones
Connect headphones to the PHONES jack and adjust the volume by turning the PHONE LEVEL control.
3 Press the HXbutton (or the Hbutton on the remote) to start playback.
You can also start playback by pressing the AMS control.
If necessary, rotate the AMS control (or press > on the remote repeatedly) to locate the track you want to start playing from.
To lock the AEJECT button
To prevent ejection of the CD by mistake during playback or pause, the AEJECT button can be locked by a menu operation.
1 While the player is stopped, press the MENU/ EXIT button.
“MENU Mode” appears in the display.
Basic playback operations
To | Do the following: |
|
|
Stop play | Press the xbutton. |
|
|
Pause play | Press the HXbutton (or the Xbutton |
| on the remote). |
|
|
Resume play | Press the HXbutton (or the Xor H |
after pausing | button on the remote). |
|
|
Locate a | Rotate the AMS control clockwise (or |
succeeding track | press the >button on the remote |
| repeatedly) |
|
|
Locate the | Rotate the AMS control |
beginning of the | counterclockwise (or press the . |
current track or a | button on the remote repeatedly). |
preceding track |
|
|
|
Eject the CD* | Press the AEJECT button after |
| stopping play. |
|
|
*The CD is ejected halfway and stops. After about 16 seconds, the CD player pulls in the CD again to protect it.
2
3
4 Press the MENU/EXIT button to complete the setting.
To unlock the AEJECT button
Do the procedure above, selecting “EJ. Enable” in step 3.
25