While the player is stopped, press the MENU/ EXIT button.
Rotate the AMS control until “Music SCAN” appears in the display, and then press the control.

Locating a Specific Track

When the player is playing, paused, or stopped, use the procedure below to quickly locate tracks.

Numeric buttons (1 to 20)

When you cue to a track while the player is playing, the track starts to play automatically. If you cue to a track while the player is stopped or paused, the player will stop at the beginning of the track or starts to play that track.

To enter a track number over 20

Press the >20 button on the remote, and then enter the corresponding digits. To enter 0, press the 10 button instead.

Example:

To play track number 30, press the >20 button, and then the 3 and 10 buttons.

Cueing to a track with the AMS control (or ./>buttons on the remote)

If you cue to a track while the player is playing, the located track starts to play automatically. If you cue to a track while the player is stopped or paused, the player will stop or pause at the beginning of the located track.

To cue to

Do the following:

 

 

The next or a

Rotate the AMS control clockwise

succeeding track

(or press the >button on the

during play or pause

remote repeatedly).

 

 

A preceding track

Rotate AMS counterclockwise (or

during play or pause

press the .button on the

 

remote repeatedly).

 

 

The beginning of the

Rotate AMS counterclockwise (or

current track during

press the .button on the

play

remote once).

 

 

A specific track while

Rotate AMS (or press the .or

the player is stopped

>button on the remote

 

repeatedly) until the track number

 

you want appears in the display,

 

and then press the AMS control or

 

the HXbutton (or the H button

 

on the remote).

 

 

Cueing to a track by entering the

track number from the remote

Press the numeric button(s) on the remote to enter the number of the track you want to cue to.

Locating a track by listening to the beginning of each track (Music Scan)

1 Press the MUSIC SCAN button on the remote. After the first part of a track is played (scanned) for the set number of seconds, Music Scan continues with the next track.

2 Press the Hbutton on the remote when you find the track you want.

To change the scanning time of each track

The scanning time for Music Scan is factory set at 10 seconds.

1

2

3 Rotate the AMS control to select the scanning time, and then press the control.

A scanning time of 6 to 20 seconds (in 1-second intervals) can be set.

4 Press the MENU/EXIT button to complete the setting.

27