Quickly Accessing a Specified Point (Mark & Locate)
By marking a specific point, you can locate that point repeatedly.
Note on marking
In the following cases, the track number and time data for the marked point and for the point that is actually located may not match.
•If the point is marked while a minus time indication appears at the beginning of the track
•If the point marked by a menu operation is located within the last few seconds of the track
The discrepancy is due to the mechanical limits of the player and does not reflect a problem in the actual operation. It is, however, recommended that you do not mark a point at such a location.
Marking the point (Mark)
While the player is playing, press the AMS control (or the MARK button on the remote).
The playback point at the time the AMS control (or the MARK button) is pressed is entered as the locate point.
To mark a point by a menu operation
You can enter the track number and time data to mark a point.
1 Press the MENU/EXIT button, rotate the AMS control until “Direct MARK” appears in the display, and then press the control.
2
3
4
5 Press the MENU/EXIT button to complete the setting.
Adjusting the marked point
(Rehearsal)
The position of the marked point can be adjusted while listening to the playback.
1 While the player is stopped, press the MENU/
EXIT button, rotate the AMS control until “Rehearsal” appears in the display, and then press the control.
After a few seconds, “Rehearsal Start” appears and a few seconds of the track up to the marked point begins to play back repeatedly.
Marked point
2 Rotate the AMS control to move the marked point. The time indication of the moved point and “Pos ok?” alternates in the display.
The point can be moved up to 8 seconds in the forward or reverse direction in
Amount of shift
3 After adjusting the point, press the AMS control. “Rehearsal Complete” appears in the display for a few seconds.
34