Getting Started

Connecting a fader start system

By connecting a fader start system to the REMOTE (8P) connector on the rear panel of the player, you can fade the sound in or out by remote control at the desired point on a disc.

Connecting an external synchronizing system

By connecting an external synchronizing system, the player operates on the clock frequency transmitted from the system.

1Connect an external synchronizing system to the EXT SYNC connector.

2Input the clock signal of 44.1 kHz TTL level.

3 Set EXT SYNC ON/OFF to ON.

When you don't use the external synchronizing system, set the switch to OFF.

Setting the REMOTE SELECT switch

Set REMOTE SELECT on the front panel of the player to activate the connector(s) for the equipment you want to use.

REMOTE SELECT

PARALLEL SERIAL

Connecting the AC power cord

Connect the AC power cord (supplied) to AC IN on the rear panel and connect the other end to a wall outlet.

Connector

Set the switch to

 

 

RS-232C

SERIAL

 

 

REMOTE (8P)

PARALLEL

 

 

Both RS-232C and

the center position

REMOTE (8P)

 

 

 

7EN