Setting the clock automatically

The CT (Clock Time) data from the RDS transmission sets the clock automatically.

1 Press (SHIFT), then press (3) (SET UP) repeatedly until “CT” appears.2 Press (5) (t) repeatedly until “CT on” appears.

The clock is set.

3 Press (SHIFT) to return to the normalGB display.To cancel the CT functionSelect “CT off” in step 2 above.

Notes

•The CT function may not work even though an RDS station is being received.

•There might be a difference between the time set by the CT function and the actual time.

Voice Drive

You can register an appropriate vocal phrase for any source including CD/MD*, and the radio station. Once the registration is completed, you can request that source just by pronouncing the registered vocal phrase for it towards the supplied microphone. This unit provides 12 “V Drive” boxes for accommodating registered phrases.

*When you connect to a CD/MD changer with a PGM (Programme memory) function, you can request a disc in the CD/MD changer.

Use the rotary commander to control this function.

Note

While the unit is receiving, recording, or playing back the traffic announcements, the voice drive function does not work.

Selecting a “V Drive” box for registration

1 Play a CD or MD, or tune in a radio station that you wish to register a phrase for.

2 Press and hold (TALK) on the rotary commander until “V Drive” appears.

Note

When the unit enters the setting mode, the disc playback or the radio reception will be suspended.

Tip

If the “V Drive” box selected in step 2 already has a registered phrase, the source corresponding to it will be played or tuned in.

20