Presetting the RDS stations with the AF and TA data
When you preset RDS stations, the unit stores each station’s data as well as its frequency, so you don’t have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset station, or the same setting for all preset stations.
Presetting the same setting for all preset stations1
2 Press (AF/TA) repeatedly to select either “AF on,” “TA on” or “AF TA on” (for both AF and TA functions).
Note that selecting “AF TA off” stores not only RDS stations, but also
3 Press (SHIFT), then press (4) (PLAY MODE) repeatedly until “B.T.M” appears.
4 Press (5) (t) until “B.T.M” flashes.5 Press (SHIFT).
Presetting different settings for each preset station1 Select an FM band, and tune in the desired station.2 Press (AF/TA) repeatedly to select either “AF on,” “TA on” or “AF TA on” (for both AF and TA functions).
3 Press and hold the desired number button until “MEM” appears.
Repeat from step 1 for presetting other stations.
Tip
If you want to change the preset AF and/or TA setting after you tune in the preset station, you can do so by turning the AF or TA function on or off.
Recording the traffic announcements
You can listen to the latest traffic announcements by recording them. The unit automatically records and stores up to eight traffic announcements. If the recording exceeds eight minutes, the recorded announcements are updated, so you can always hear the latest information.
The TIR function turns on the unit automatically and records the traffic announcements for up to two hours before and after a preset time.
Presetting the time and the station1 Press and hold (TIR) until “TIR” lights up in the display.2 Press (5) (t) repeatedly until “TIR on” appears.3 Press (TIR) repeatedly until the time indication appears.1Set the hour by rotating the dial.2Press (5) (t) until the minute digits flash.3Set the minute by rotating the dial.4 Press (TIR).continue to next page t
17