3 Press (5) (t) .

4 Rotate the dial to select the desired cutoff frequency.

The cut-off frequency in the display changes as follows:

62 y 78 y 99 y 125 y 157 y off

If you want to adjust the volume of the subwoofer(s), press (2) (T) and rotate the dial as in step 3 of “Adjusting the volume of the subwoofer(s).”

5 Press (SOUND) for two seconds.

After the frequency setting is complete, the display returns to the normal playback mode.

Listening to each programme source in its registered DSO

— Source Sound Memory (SSM)

Each time you return to the same source, you can hear the same DSO menu and equalizer curve registered for that source, even after changing the programme source or turning the unit off and then on again.

Other Functions
Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

You can also control the optional CD or MD units with the rotary commander.

By pressing buttons (the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

TUNER t CD t MD

Pressing (MODE) changes the operation in the following ways;

•Tuner : FM1 t FM2 t MW t LW

•CD unit : CD1 t CD2 t …

•MD unit : MD1 t MD2 t …

28