By rotating the control (the SEEK/AMS control)Rotate the control momentarily and release it to:

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to tune in a specific station.

By pushing in and rotating the control (the PRESET/DISC control)

Press (SOUND) to adjust the volume and sound menu.

Press (LIST) to:

•Display the memorised names.

•Display the programme type.

Press (REC) to record a voice memo.

Press and hold (TALK) to select a “V Drive” box for registration. Press to :

• Register a vocal phrase.

• Request a registered source.

Press (PLAY) to play back the voice memo.

Press and hold (PLAY) to erase the voice memo.

Changing the operative direction

The operative direction of controls is factory- set as in the illustration below.

To increase

Push in and rotate the control to: •Receive the stations memorised on the

number buttons. •Change the disc.

Other operations

Rotate the VOL control to adjust the volume.

Press (ATT) to attenuate the sound.

OFF

Press (OFF) to turn off the unit.

To decrease

If you need to mount the rotary commander on the right side of the steering column, you can reverse the operative direction.

Press (SOUND) for two seconds while pushing the VOL control.

Tip

You can control the operative direction of controls with the unit (page 30).

29